Kenco-engineering Float Repair Kit Instrukcja Użytkownika Pobierz pdf (Strona 1)

KENCO ENGINEERING COMPANY

P.O. BOX 470426 TULSA, OK 74147-0426

PHONE: (918) 663-4406 FAX: (918) 663-4480

Web: www.kenco-eng.com e-mail: [email protected]

MODEL KEFS LIQUID LEVEL FLOAT SWITCH

FLOAT REPAIR KIT INSTRUCTIONS.

RK-FS4-KEFS; RK-FS6-KEFS, FLOAT REPAIR KIT

To install new Float, remove old Float from KEFS and make sure the threads on the Float

Counterweight are clean and dry. Thoroughly shake the supplied bottle of Thread Locking compound and

apply liberally to the threads of the Float Counterweight and the Float. Screw the Float onto the Float

Counterweight and tighten firmly. If the supplied or one of the optional Float Extensions is used, apply the

Threadlocker to the threads on both ends of the Extension. Thread the Float Extension onto the Float and then

thread the assembly onto the Float Counterweight and tighten firmly. Wipe off any excess threadlocker.

Reinstall switch. Threadlocker will achieve full cure in 24 hours.

(58795 Rev A)

KENCO ENGINEERING COMPANY P.O. BOX 470426 TULSA, OK 74147-0426 PHONE: (918) 663-4406 FAX: (918) 663-4480 Web: www.kenco-eng.com e-mail: info@kenco-

Brak uwag

Kenco-engineering Float Repair Kit Instrukcja Użytkownika Strona 1